The Spacers are used with the 12" twin track style Roll-a-Ramp sets. These Spacers provide security by making the ramp width constant with each use as well as ensuring that the width does not change. All spacers easily snap into place on the ramp safety rails.

The Seg Mount (S) Bracket is a quick mounting universal
bracket that provides a way to temporarily mount to both
homes and vehicles using the ramps approach plate.
Thumb screws on the bracket hold the ramp in place and
provide security.

These special approach plates are designed for use on Small Van applications.

The Low Van Entry Plate will maximize the entry space on a Mini Van and accommodate the fascia that covers the van’s sliding door mechanism.

With this upper approach plate the Roll-a-Ramp will allow many clients to ride into the side door of a mini van.

For those who wish to load into the bed of a pickup, this bracket provides an extra degree of security by holding the first load bearing section to the pickup tailgate. Bracket must be secured to the tailgate with either rivets or screws. The low profile does not interfere with other uses.

This universal bracket provides a handy method to attach the upper load bearing section of a Roll-a-Ramp to any surface.

Excellent for attaching beneath the door of a house or to a van floor.

For those who need a ramp longer than 12 feet (3.66m), we recommend the use of this support unit. One pair at the mid point will allow a Roll-a-Ramp to be constructed up to 20 feet (6.1m) in length.

This special upper approach plate is for those users who need entry into either vans or home with an opening that is less than 30" wide and who still desire or need a full 30" ramp to accommodate their chair needs. The special safety fence will guide the wheelchair through the narrowed opening